Skip to content
CGD Roofing Standing Seam

Service area

Standing Seam Metal Roofing in Innisfil & Alcona

Innisfil is a mix that suits metal well: an older lakefront cottage stock along the Lake Simcoe shoreline that has largely been converted to year-round living, plus rapid new subdivision growth through Alcona and the Friday Harbour corridor.

Coverage: Fifteen minutes south of the shop. Same-week site visits are normal here.

The converted-cottage half of that has the same problem we see in the Kawarthas — a roof assembly designed for seasonal use, now heated all winter, generating condensation and ice damming. The new-build half is mostly about specifying a roof once and never touching it again.

We cover Alcona, Lefroy, Belle Ewart, Stroud, Churchill, Cookstown and the shoreline from Big Bay Point south.

What we specify differently in Innisfil

A metal roof is not one product. These are the conditions that change the assembly here.

Shoreline wind off Lake Simcoe

Open exposure across the lake means sustained uplift on west-facing elevations. Double-lock seams and tightened perimeter clip spacing are the standard spec for shoreline Innisfil properties.

Converted cottages with seasonal-era roofs

A roof built for July and now heated in January will sweat. We look at the cavity before we quote the covering, because metal over an unventilated condensation problem hides it rather than fixing it.

Communities we cover

Standing seam installation, metal roof repairs, custom fabrication and roof inspections throughout Innisfil and surrounding areas.

How we build it in Innisfil

Three levels of assembly, quoted the same way everywhere we work — from a measured survey, never a rate card. What moves a quote is your roof, not your postcode.

Silver

Direct installation

Panels formed on site and installed over a sound existing deck. The straightforward option when the structure underneath is already in good shape.

  • 1" mechanical lock standing seam, roll-formed on site
  • 26 gauge steel, standard colour range
  • Synthetic underlayment
  • Standard ridge, eave and gable flashings
  • Full site cleanup and magnet sweep

Best for: Sound decks, simple rooflines, budget-led projects

Quote the Silver system
Most specified

Gold

Strapped & ventilated

Adds a strapped substrate that creates a ventilated cavity under the panel — the assembly that actually addresses ice damming rather than hiding it.

  • Everything in Silver
  • Strapping system for a ventilated air cavity
  • High-temperature ice & water shield, past code minimum
  • Choice of 24 or 26 gauge steel
  • Snow retention assessment mapped to your roof

Best for: Most Ontario homes — our most-specified system

Quote the Gold system

Platinum

Architectural grade

Full architectural detailing in 24 gauge with a PVDF finish. For heritage homes, custom builds, and anything where the roof is a design element.

  • Everything in Gold
  • 24 gauge steel with PVDF (Kynar 500) finish
  • Custom chimney caps, coping and box eavestrough
  • Double-lock 180° seams throughout
  • Concealed-fastener detailing at every transition

Best for: Chalets, heritage homes, complex or highly visible rooflines

Quote the Platinum system

Every project is quoted from a site visit or drone survey — roof complexity, tear-off versus overlay, gauge, finish and access all move the number, and none of them can be assessed from a postcode.

Innisfil metal roofing questions

Do you serve Friday Harbour and the Innisfil lakefront?

Yes. Lakefront properties get a wind-uplift-specific assembly — 24 gauge, double-lock 180° seams and closer clip spacing at rakes and ridges, which are the zones where uplift concentrates.

Worth reading before you quote

Other areas we serve

Get a measured quote in Innisfil.

Tell us the address and roughly what you have. We will book a site visit or a drone survey and come back with a real number — not a range designed to get us in the door.

Call 705-816-5282 Request a quote

Free estimates · Licensed & insured · Serving Ontario from Barrie

Call now Free quote