Skip to content
CGD Roofing Standing Seam

Regional coverage

Standing Seam Metal Roofing in York Region

York Region work skews toward two things: architectural metal on custom builds through King, Aurora and the Oak Ridges Moraine, and accent applications, entry canopies, dormer wraps, bay roofs and feature walls, on larger suburban homes.

Coverage: Comfortably within daily range south of Barrie via the 400.

The short answer

Metal roofing in York Region from CGD Roofing, a Barrie contractor working within about an hour of our shop via Highways 400 and 404. We install 1" mechanical lock standing seam on full re-roofs, custom builds and accent work such as entry canopies and dormer wraps, with panels formed on site. Parts of the region sit in heritage districts or carry subdivision rules, so we check those before specifying a profile or colour.

Standing seam does both well. The same 1" mechanical lock panel that covers a full roof also makes an excellent accent element, and because we form on-site we can match an accent to a main roof exactly rather than approximating from a supplier's stock range.

We cover Newmarket, Aurora, King City, Nobleton, Schomberg, Richmond Hill, Vaughan, Markham, Stouffville, East Gwillimbury and Georgina. Newmarket, Aurora, Markham, Vaughan and Richmond Hill are covered town by town below: the housing stock, the heritage districts and how we get there.

What we specify differently in York Region

A metal roof is not one product. These are the conditions that change the assembly here.

Architectural accents and feature elements

Entry canopies, dormer wraps, bay roofs and gable feature panels are a large share of York Region enquiries. On-site forming means an accent matches the main roof exactly, in the same coil, the same run.

Custom builds on the moraine

King, Aurora and the moraine estates are architect-specified, and the roof usually carries a lot of the design. 24 gauge PVDF with double-lock seams is the standard specification for that work.

Communities we cover

Standing seam installation, metal roof repairs, custom fabrication and roof inspections throughout York Region and surrounding areas.

Town pages in York Region

What changes from one York Region town to the next: housing stock, heritage rules and how we get there.

How we build it in York Region

Three levels of assembly, quoted the same way everywhere we work, from a measured survey, never a rate card. What moves a quote is your roof, not your postcode.

Silver

Direct installation

Panels formed on site and installed over sound existing roof boards. The straightforward option when the structure underneath is already in good shape.

  • 1" mechanical lock standing seam, roll-formed on site
  • 26 gauge steel, standard colour range
  • Synthetic underlayment
  • Standard ridge, eave and gable flashings
  • Full site cleanup and magnet sweep

Best for: Sound decks, simple rooflines, budget-led projects

Quote the Silver system
Homeowner favourite

Gold

Strapped & ventilated

Adds a strapped substrate that creates a ventilated cavity under the panel, the assembly that actually addresses ice damming rather than hiding it.

  • Everything in Silver
  • Strapping system for a ventilated air cavity
  • High-temperature ice & water shield, past code minimum
  • Choice of 24 or 26 gauge steel
  • Snow retention assessment mapped to your roof

Best for: Most Ontario homes. The one we would put on our own houses

Quote the Gold system

Platinum

Architectural grade

Full architectural detailing in 24 gauge with a PVDF finish. For heritage homes, custom builds, and anything where the roof is a design element.

  • Everything in Gold
  • 24 gauge steel with PVDF (Kynar 500) finish
  • Custom chimney caps, coping and box eavestrough
  • Double-lock 180° seams throughout
  • Concealed-fastener detailing at every transition

Best for: Chalets, heritage homes, complex or highly visible rooflines

Quote the Platinum system

Every project is quoted from a site visit or drone survey, roof complexity, tear-off versus overlay, gauge, finish and access all move the number, and none of them can be assessed from a postcode.

York Region metal roofing questions

Do you do accent metal rather than full roofs?

Yes, entry canopies, bay roofs, dormer wraps and gable features are regular work. Because panels are formed on site, an accent added later can still be matched to the original run.

Worth reading before you quote

Comparisons

Standing Seam vs Metal Shingles in Ontario

Both are metal roofing and both outlast asphalt. One is a continuous panel, the other hundreds of interlocking pieces. How each handles Ontario snow, slope and looks.

Comparisons

Steel vs Aluminum Metal Roofing in Ontario

Aluminum will not rust, but Ontario is not the seacoast. How Galvalume steel and aluminum compare on corrosion, hail, snow load, thermal movement and cost.

Metal roofing services in York Region

Other areas we serve

Get a measured quote in York Region.

Tell us the address and roughly what you have. We will book a site visit or a drone survey and come back with a real number, not a range designed to get us in the door.

Call 705-816-5282 Request a quote See my range online

The online range takes about 90 seconds and no phone call.

Free estimates · Licensed & insured · Serving Ontario from Barrie

Call now Free quote